$ sudo dd if= artful-desktop-amd64.iso of= /dev/sdd bs=1M status=progress Type the following dd command to create a bootable USB image from a. Warning: Be careful with the USB stick/pen/disk names. Step 4 – Create a bootable USB stick on Linux Once verified you can write it to the USB device. It is clear that /dev/sdd is my usb stick device name. sd 6:0:0:0: Write cache: disabled, read cache: enabled, doesn 't support DPO or FUA usb-storage 2- 1.7: 1.0: USB Mass Storage device detected usb 2- 1.7: SerialNumber: FooBarNixCraftSerialNumber usb 2- 1.7: New USB device found, idVendor = 0781, idProduct=558a usb 2- 1.7: New USB device strings: Mfr = 1, Product=2, SerialNumber=3 usb 2- 1.7: Product: Ultra You can now quit Terminal and eject the volume.Usb 2- 1.7: new high-speed USB device number 12 using ehci-pci When Terminal says that it's done, the volume will have the same name as the installer you downloaded, such as Install macOS Monterey.After the volume is erased, you may see an alert that Terminal would like to access files on a removable volume.Terminal shows the progress as the volume is erased. When prompted, type Y to confirm that you want to erase the volume, then press Return.Terminal doesn't show any characters as you type. When prompted, type your administrator password.If the volume has a different name, replace MyVolume in the command with the name of your volume. Each command assumes that the installer is in your Applications folder, and MyVolume is the name of the USB flash drive or other volume you're using.
Type or paste one of the commands below into Terminal, then press Return to enter the command.Open Terminal, which is in the Utilities folder of your Applications folder.Plug in the USB flash drive or other volume that you're using for the bootable installer.
0 kommentar(er)
